Purchase your dry ice blasting machine
If you want to buy a dry ice blasting device you have come to the right place. We are a German producer of dry ice blasting systems with advanced technology and high aspiration for perfection. We are pleased to advise you personally, therefore we ask you to contact us and satisfy yourself of the dry ice blasting systems of White Lion. In our broad range of products, you will find the dry ice blasting system, that matches your needs.
Dry ice machine for cleaning
Efficient cleaning with a dry ice machine for cleaning
A dry ice machine for cleaning is a device in which high quality components are used. The mechanical and especially the thermal strain on a dry ice machine for cleaning are especially high. So robust stainless steel, thick-walled glass-fibre reinforced plastic, glass and anodised aluminium are the materials of choice when it comes to the development of a dry ice machine for cleaning.
Advantages of a dry ice machine for cleaning
With a dry ice machine for cleaning dry ice pellets will be shot at the surface to be cleaned by air pressure and stubborn dirt will be removed even without the use of abrasive materials. Working with mineral-organic blasting material such as sand, soda, granulated nutshells or glass pearls is still very common in tenacious cases. These treatments have two unpleasant secondary effects: On the one hand, the basic material can be attacked from the abrasive blasting material and even get complete destroyed. On the other hand, the blasting material is not only blown to the point to be cleaned, but everywhere. At its best, it falls to the floor, where it can be swept up and disposed of.
It is much more supposable that it will stick to every corner from where it has to be removed by painful cleaning procedures. In fact, high-pressure cleaning with water does not have this problem, but the effectiveness of a sharp water jet is limited and a high level of moisture in the cleaning process is a criterion for exclusion for many applications.
On the contrary, when working with the dry ice machine for cleaning, there is no blasting material and no water as waste material. The dry ice pellets evaporate free of residues. All that remains after treatment with a dry ice machine for cleaning is the detached dirt.
Components of a dry ice machine for cleaning
A dry ice machine for cleaning requires three components to operate: electrical power, compressed air and blasting material. The electrical energy is required to operate the pumps, the control electronics and the pellet feed. The compressed air is the medium which transports the blasting material. The dry ice pellets are the active medium that ensures the cleaning capacity. Therefore, a dry ice machine for cleaning includes a mains connection, a compressor and a device for supplying with dry ice pellets. These can either be supplied externally or being produced on site using a separate pelletizer.
Everything you need from White Lion
We supply dry ice machines for cleaning for every application. Whether a small car workshop, service provider, rental business or stationary industrial application – we have the right dry ice machine for cleaning for every application. We manufacture the dry ice blasting unit and the pelletizers ourselves. For the supply of compressed air, we trust in the proven quality of our high-performance partners. Of course, each of our dry ice machines for cleaning is compatible with any air compressor.
You receive the best Made-in-Germany quality from us. Our dealers and importers are consciously selected by White Lion and also perform a professional and competent service. In this way we guarantee you affordable prices and quick contact if questions need to be clarified. Can we convince you with a demonstration? Call us, we will find the right dry ice machine for cleaning for your application.
½, ¾ and 1 inch dry ice machines for cleaning
The performance of a dry ice blasting device relevant to two factors, on the one hand on its actual condition and quality, on the other hand on the compressed air that is fed to the dry ice system.
The quality of the compressed air supply is determined by three sizes:
- Air volume, volume flow in m3 / min
- Air pressure in bar or psi
- Air humidity, if possible with a low residual moisture
Air volume and air pressure should be as high as possible, in particular the air volume in connection with the air pressure is significant for the performance of the dry ice blasting process. Make sure that your dry ice blasting unit is suitable to match the amount of air that you can provide so that it does not lose power due to oversizing. The professional therefore differentiates between the following system categories:
½, ¾ and 1 inch dry ice machines for cleaning
White Lion knows about this problem and therefore offers you a wide selection of dry ice machines for cleaning.
½ ”dry ice blasting systems
- WL Mini Cube
- WL 1000 Minimax
¾ ”dry ice blasting systems
- WL 1500 Competition
- WL 3000 Profi
- WL 3000 Iron
- WL 5000 AirMax
1 ”dry ice blasting systems
- WL 3000 Profi
- WL 3000 Iron
Special applications of the dry ice machines for cleaning
There are many applications in which heavy soiling occurs together with a very sensitive surface. This makes cleaning with conventional methods a very complex and expensive thing. A typical example are printing machines: leaking colors over circuit boards and cable connections can hardly be cleaned using conventional methods. A dry ice machine for cleaning can also lead to excellent results in apparently hopeless cases: the dirt will be removed free of residues and subjacent sensitive components are permanently protected. As a result, you will get a new looking machine instead of a soiled destroyed machine which is ready for the scrap. Summarized, a dry ice machine for cleaning can completely clean even hopeless cases with massive contamination from paint, bitumen or other sticky residues.
FAQ – Typical questions:
Why should you buy a dry ice blasting machine from White Lion?
You receive first class “Made in Germany” quality from White Lion. Our products impress with their highly developed engineering, qualitative components and excellent manufacture down to the last detail. We also offer an excellent and customer-oriented service.
What are White Lion dry ice blasting machines suitable for?
White Lion’s dry ice cleaners are equally suitable for stationary and mobile use. All White Lion machines are either portable or stored on stable wheels. So they can be easily moved to any desired location.
What kind of soiling can be removed with dry ice blasting?
Dry ice blasting is one of the most universal cleaning methods. It shows especially to avantage when removing sticky or firmly baked dirt crusts. Deposits of oils and oil paints, greases or varnishes can be removed completely by dry ice blasting. The surface under the dirt remains completely untouched.
What are the limits of the dry ice machine for cleaning?
Dry ice blasting is suitable for all types of soiling, but not reasonable for all types of soiling. If the soiling is easy to wash off, the dry ice machine for cleaning is certainly oversized. With large-area paint stripping, dry ice blasting is feasible, but very exhausting. A pretreatment can offer here greater efficiency.
Who needs a dry ice machine for cleaning?
A dry ice machine for cleaning is a highly efficient cleaning device for particularly sensitive environments. In addition to the companies that have a suitable demand for these cleaning method, the dry ice machine for cleaning is a very reasonable investment, especially for machine rental companies.