Dry ice blasting is mainly used on cars for paint stripping and surface preparation, where old layers of paint are removed. It is also suitable for cleaning engines and components by removing oil and grease. It also enables the gentle restoration of classic cars and the removal of rubber and plastic residues. Even stubborn dirt in vehicle interiors, such as carpets and upholstery, can be cleaned effectively.
Dry ice blasting of motor vehicles is a modern and environmentally friendly method for thorough vehicle cleaning that is both effective and gentle. This process uses dry ice, which dissolves in carbon dioxide gas without leaving any residue, to remove dirt, deposits and old paint without damaging the surfaces. This method is particularly suitable for trucks, as no laborious masking work is required on the engine, alternator, transmission and other components.
Dry ice is non-conductive and does not cause corrosion, making it safe for gentle cleaning of electrical components and other sensitive parts.
The dry ice technique is environment friendly as it is a by-product of the chemical industry and causes no additional CO2 emissions. No harmful gases are produced and the process is safe and non-toxic once the pellets hit the surface and sublimate.
Dry ice blasting can be used to thoroughly clean the engine, underside and wheel rims without using water, solvents or chemicals. Dry ice can also be used to clean the interior, removing odours and protecting textile fibres. Rubber or plastic parts are only cooled slightly above the freezing point and remain elastic and undamaged.
The cleaning method also offers advantages for various other industries such as the food industry, the rubber and wood industries and many more. It enables effective and environmentally friendly cleaning that improves the quality and safety of cars. Dry ice cleaning of motor vehicles is therefore a sustainable and efficient solution that protects both the environment and the safety of vehicle components.
Would you like to find out more about us,
request a non-binding quote or
have questions about our dry ice blasting machines?
Restoring classic cars requires not only passion, but also experience and special equipment. A dry ice blaster system from White Lion can be helpful for many restorations, but there are a few things to bear in mind. Dry ice blasting involves shooting dry ice onto the workpiece at high speed. The blasted dirt particles can be swirled by the air flow and stick to unwanted areas. Before dry ice cleaning a car, all ventilation and door slits should therefore be carefully taped off to prevent dirt from entering the car interior and causing expensive damage.
When cleaning the engine compartment, it is important to distinguish between external and internal usage. Dry ice cleaning can be used to thoroughly remove dirt such as old sealants without damaging the patina of the engine. The technique can also be used during an engine overhaul to clean mechanical components inside the engine.
The underbody protection of classic cars is often coated with bitumen or adhesive. Before a new layer is applied to the underbody, the old underside protection must be carefully removed to avoid adhesion problems on the underside. Dry ice blasting utilizes the different thermal expansion coefficients of bitumen and steel to gently and effectively remove the brittle underbody finish. The cold shock blasts off the underside protection without damaging the sheet metal.
The method can also be used to remove adhesive residue from the interior of classic cars to ensure optimum adhesion of new carpets and headliners. The nozzle of the blasting machine is aimed specifically at the adhesive residue, causing it to flake off completely and creating a clean surface for the new adhesive.
The use of dry ice as a blasting agent in the automotive industry has a number of advantages that make it an attractive cleaning method for cars. This method is particularly suitable for the gentle cleaning of interior and exterior parts of cars as well as for surfaces prior to RTV coating.
A major advantage of dry ice blasting is that it is dry and therefore no aqueous or chemical solutions are required. This means that painting or coating can take place immediately after cleaning, which shortens production times and increases efficiency. Another advantage is that no secondary waste is produced during dry ice cleaning, as the blasting material changes directly into a gaseous state when it hits the surface and therefore no disposal of blasting residue is necessary, which reduces disposal costs.
In addition, dry ice cleaning is not abrasive and blasting with dry ice pellets does not damage sensitive surfaces, which improves product quality. The environmental friendliness lies in the fact that no chemicals or solvents are used, which minimizes the environmental impact.
The use of dry ice in vehicle cleaning saves significant time and allows employees to clean more vehicles in less time, resulting in increased sales and profits. With a variety of applications such as adhesive removal, composite tooling cleaning, core boxes, general equipment, moulds and parts, White Lion offers a wide range of solutions for the automotive industry looking for efficient and eco-friendly methods.
Dry ice cleaning is an efficient and environmentally friendly cleaning method for vehicles in the automotive industry. It enables fast, high-quality cleaning and shortens production times. Your car will shine in new splendour with the use of dry ice cleaning.
Our advice is individually tailored to your needs in order to find the optimum solution. We thoroughly analyse your requirements to identify the right solution. A detailed investigation enables us to gain a comprehensive understanding of your objectives. Based on this understanding, you will receive a customized quote for a blast machine and accessories that meet your objectives. Long-term support ensures that your solution remains effective.
We believe that tailored advice and solutions are the key to success. With our individual approach, we will find the best solution for your needs.
You can reach us during our office hours (08:00 to 16:00) by telephone on +49 61 51 / 60 66 82 0
Active communication on the market and proximity to the customer are essential for the development of a company,
so we are pleased to be actively involved in the association of “dry ice blasters”.
White Lion inspires with innovation “Made in Germany”
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
